|
|
Scale model of the famous sailplane.The wings are equipped with air-brakes but also with camber flaps. These flaps have a longer length compared to reality and are divided into 2 parts. Thus, it is possible to use these 2 parts, together, like gigantic ailerons but also as camber flaps. This makes possible to make the Swift even more general-purpose and powerful in aerobatic.
Swift S1 ARF (covered with Oracover®).
The model is designed and manufactured in Czech Republic. Spare parts are in stock.
De-luxe version:
- Fully built-up and matched model.
- Ready fiberglass FUSELAGE with already installed sliding cabin, fiberglass seat, dashboard panel, connectors, wiring for aileron servos and airbrakes and wing joiner casing. Further rudder and bowden are fixed. Retract gear (bay doors installed), tailwheel and tow hook already installed.
- WINGS with metallic airbrakes and ailerons already installed. Wing fixing device already installed and servos connector also.
- Stickers are sticked on model.
Technical specification:
|
|
|
|
|
|
|
RECOMMENDED SERVOS FOR |
4,8V |
7,4V |
AILERONS 2X | HS-225 MG (Hitec) | SV-1250MG+ HiVOLT (Savox) |
FLAPS 2x | HS-225 MG (Hitec) | SV-1250MG+ HiVOLT (Savox) |
ELEVATOR 1x | HS-225 MG (Hitec) | SV-1250MG+ HiVOLT (Savox) |
RUDDER 1x | HS-485 HB (Hitec) | HS-5495 BH (Hitec) |
AIRBRAKES 2x | HS-82 MG (Hitec) | HS-5087 MH (Hitec) |
TOW HOOK 1x | HS-645 MG (Hitec) | D645MW (Hitec) |
RETRACT GEAR 1x | HS-645 MG (Hitec) | D625MW (Hitec) |
Suitable setup for take off from the take-off dolly:
|
The de luxe ARF kit contents:
- Ready fiberglass fuselage with already installed fiberglass seat and dashboard panel. De luxe version is delivered as you see with retract gear (bay doors installed), tailwheel and tow hook already installed.
- Ready foam core abachi wings with carbon-fibre reinforcing covered with Oracover® with metallic airbrakes and ailerons already installed.
- Ready foam core balsa horizontal stabiliser covered with Oracover®.
- Fiberglass hollow moulded fin
- Fiberglass cabin frame with glued-on sliding cabin
- Manual
- Accessories
Extra high quality product, setting a very new high quality standard in this category!
Equipments required
02074-POTEXT Název zboží: Transport bags for Swift S1 3140 mm Price: 274,00€ Delivery status: in stock The transport bag is made of several layers of high quality material. It is suitable for transporting and storing expensive models. Package Contents: Wing cover, fuselage, elevator, wing joiner, wing tips. To use this package, you need to have removable wing tips. | |
JSP-75-O Název zboží: SPIN 75 PRO OPTO Price: 156,30€ Delivery status: in stock Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC). | |
3707 Název zboží: Xmotor XM5060EA-10 V3 Price: 124,42€ Delivery status: in stock Outrunner brushless electric motor. Ø49.5mm x 58.2mm, RPM 490/1V, weight 392g, Max. 95A (15S), input voltage Lixx 5-6s, shaft 6 mm. | |
020D01 Název zboží: Sailplane Take-off Dolly I Price: 82,00€ Delivery status: in stock Kit of Sailplane Take-off Dolly for models with a fuselage width up to 219 mm. | |
02074-PO Název zboží: Transport bags for Swift S1 3140 mm Price: 79,00€ Delivery status: in stock Bags for wings, elevator and rudder. | |
02074SPB Název zboží: Polystyrene 1:3,5 sailplane pilot Peter (brown) Price: 69,00€ Delivery status: in stock 1:3,5 scale sailplane pilot doll. Hand painted. Designed for Swift S1. Weight: 45g. | |
02074SPR Název zboží: Polystyrene 1:3,5 sailplane pilot Peter (red) Price: 69,00€ Delivery status: in stock 1:3,5 scale sailplane pilot doll. Hand painted. Designed for Swift S1. Weight: 45g. | |
SAVOX-SV1250MG Název zboží: SV-1250MG+ HiVOLT digitální servo (10kg-0,085s/60°) Price: 60,20€ (recommended quantity: 5 pieces) Delivery status: in stock at supplier Digitální Hi-Volt mini servo s coreless (bezjádrovým) motorem a kovovými převody, 2x kuličkové ložisko, 4,6/8.0kg při 6,0/7,4V a 0,11/0,095s na 6,0/7,4V, váha 29,6g, 35,0x15x29,2mm. Provozní napětí 4,8 - 8,4V. Notice: 7,4V for: 2x aileron, 2x flap, 1x elevator | |
020SERVISEG Název zboží: Construction Service (Installation of EG tow hook in Discus, Ventus, Swift and Fox fuselages) Price: 49,90€ Delivery status: in stock The price includes the towing hook (item no. 020201EG) and gluing to the fuselage, see picture. Also included is a tow hook servo tray (item no. 20201EG.ST). We recommend this service if the model is equipped with a motor, but you would like to keep the possibility of getting the model into the air by towing. Notice: for the combination of motor and tow hook | |
1HI38801 Název zboží: D625MW rychlé a silné digi servo (10kg) Price: 42,13€ Delivery status: in stock Rychlé digi servo s kovovými převody nové generace s elektronikou s bleskurychlou odezvou pro všeobecné použití. Programovatelné, napájení 4,8-7,4V. Tah 6,3kg.cm, rychlost 0,20s/60°při 4,8V, tah 10kg.cm, rychlost 0,13s/60° při 7,4V. Náhrada HS-5625MG a HS-5665MH. Notice: 7,4V for: 1x rudder | |
1HI38802 Název zboží: Servo D645MW silné digi servo 13kg Price: 42,13€ Delivery status: in stock Notice: 7,4V for: 1x tow hook | |
1HI3181 Název zboží: HS-5087 MH HiVolt DIGITAL Price: 40,12€ (recommended quantity: 2 pieces) Delivery status: in stock Silné digitální mikroservo 22g s kovovými převody a zvýšeným napájecím napětím (až 2S LiPo) pro elektrolety a větroně. 1xBB, tah 4,3 kg/cm, rychlost 0,13s/60st při 7,4V. Programovatelné. Notice: 7,4V for: 2x airbrakes | |
020SERVISSWIFT Název zboží: Construction Service (Cutting the nose of the Swift S1 fuselage for 50mm spinner including gluing the motor mount) Price: 37,80€ Delivery status: in stock The used motor mount is intended for the recommended Dualsky 5060 motor. If you are interested in gluing the motor mount for another motor, please contact us. | |
1HI3115-1x Název zboží: HS-645 MG bulk 1pc unpacked Price: 34,00€ (recommended quantity: 2 pieces) Delivery status: in stock 50 g standard servo with metal gears with increased Torque for larger models, cars 1:8. 2xBB, thrust 7.7 kg / cm, Speed 0.24 to 4.8 V. s/60st Notice: 4,8V for: 1x tow hook, 1x retract gear | |
1HI3060 Název zboží: HS-225 MG Price: 32,09€ (recommended quantity: 5 pieces) Delivery status: in stock Strong miniservo 27g with metal gears for all-around use. 1xBB, torque 3,9 kg/cm, speed 0,14s/60st in 4,8 V. Notice: 4,8V for: 2x ailerons, 2x flaps, 1xelevator | |
1HI3194 Název zboží: HS-5495 BH digital Price: 28,07€ Delivery status: in stock Standard digital servo with 44.5 g karbonite gears, Torque 6.4 / 7.5 kg / cm and a speed of 0.17 / 0.15 s/60st. or at 6V. 7.4 V. Servo belongs to the series HiVolt and can be powered with 2 of Article LiPo (7.4 V). Notice: 7,4V for: 1x retract gear | |
1HI3085 Název zboží: HS-485 HB Price: 24,06€ Delivery status: in stock Standard servo with 45 g Carbon gears for general use. 1xBB, Torque 4.8 kg / cm, Speed 0.22 to 4.8 V. s/60st Notice: 4,8V for: 1x rudder | |
1HI3042-1x Název zboží: HS-82 MG Bulk 1pc Price: 23,10€ (recommended quantity: 2 pieces) Delivery status: in stock Unpacked fast microservo 19g with metal gears for small electric planes and sailplanes. Torque 2,6 kg/cm, speed 0,11s/60st in 4,8 V Notice: 4,8V for: 2x airbrakes | |
02050068SC Název zboží: Alu precision spinner TURBO SC 50/6,0/8 Price: 21,90€ Delivery status: in stock Alu precision spinner TURBO for folding props. Spinner Ø50mm, collet 6,0mm, 3 mm propeller plug, for blade root width 8 mm. Short version of the SCALE spinner, for a more scale look . | |
02074-ON Název zboží: Protective sleeve for Swift S1 3,14m canopy Price: 14,40€ Delivery status: in stock Protective sleeve to prevent scratching during storing and transporting the model. | |
020201EG Název zboží: Tow hook EG Price: 13,90€ Delivery status: in stock For FES (Front Electric Sustainer) model version . Dimensions: 50x20x8mm, pushrod Ø3mm. Notice: for the combination of motor and tow hook | |
723971 Název zboží: CAM CARBON 15x8" Z, 38x20cm Price: 10,80€ Delivery status: in stock the width of the root 8mm for M3 screw, to 9.000 rev / min Notice: for: LiPol 6S / Xmotor XM5060EA-10 V3 | |
UHU5146 Název zboží: UHU-Por 50ml Price: 4,38€ Delivery status: in stock Notice: for gluing the servo covers | |
020201EG.ST Název zboží: Servo tray for EG tow hook Price: 4,25€ Delivery status: in stock For standard servo. Suitable for EG tow hook for Discus 2a, Discus 2c, Ventus 2cx, Swift S1 3.73m, Swift 3.14m. Notice: for tow hook EG | |
0167823-0,25 Název zboží: Velcro fastener width 5cm; length 25cm Price: 1,80€ Delivery status: in stock self-adhesive Velcro with high-quality acrylic glue, both parts. Price per 25cm. Notice: for fixing the battery, receiver, etc. | |
0123456789 Název zboží: digit sticker Price: 1,40€ Delivery status: in stock Suitable for describing servoconnectors. Digit height is 5mm. | |
0123456789BW Název zboží: Digits (stickers) for labeling the connectors (Black/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. | |
0123456789RW Název zboží: Digits (stickers) for labeling the connectors (Red/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. | |
020CGSTICK Název zboží: Center of gravity mark Price: 1,20€ Delivery status: in stock 6pcs. Ø14mm, 8Pcs. Ø10mm. |
Spare parts
02074-2DLJ Název zboží: Swift S1 3,14 m ARF DE-LUXE ARF Wings (JEPPESEN) Price: 578,20€ Delivery status: in stock Wngs with metallic airbrakes installed. Wing fixing device already installed and servos connector also. .Stickers are sticked on wings.Covered Oracover® | |
02074-2JARF Název zboží: Swift S1 3,14 m ARF STANDARD ARF Wings (JEPPESEN) Price: 536,50€ Delivery status: in stock Wingspan 3,14m. Wings with metallic airbrakes installed. Covered Oracover® | |
02074J-1DL Název zboží: Fuselage Swift S1 3,14m Deluxe (JEPPESEN) Price: 479,00€ Delivery status: in stock Completely fitted fuselage (equipped with canopy+frame, towing hook, retractable landing gear, connectors with cables, seat, 2x dashboard with instruments, rudder). Covered with stickers. White fiberglass, length 1740 mm. | |
02074-1 Název zboží: Fuselage SWIFT 3,14m Price: 283,00€ Delivery status: in stock fiberglass white gelcoated, length 1740 mm | |
02074-6DLJ Název zboží: Canopy Swift S1 3,14m Jeppesen De luxe Price: 149,00€ Delivery status: in stock Complete canopy glued to the frame including dash-board panel. Material: Vivak® 1mm, transparent. | |
5MA201110 Název zboží: ORACOVER 10m White (10) Price: 140,16€ Delivery status: in stock Weight: 89 g/m2 ; width is 60 cm; lenght 10m. | |
02074-3ARF Název zboží: Swift 3,14m elevator ARF Price: 114,00€ Delivery status: in stock Kombinace polystyren balsa. Hmotnost ~ 200g, délka 810mm. | |
020116390 Název zboží: Sailplane retract gear ø 90mm Price: 104,00€ Delivery status: in stock For model on a scale 1:4 and to weight 6 kg. | |
02074-3ARC Název zboží: Swift 3,14m elevator (uncovered - ready to cover) Price: 92,00€ Delivery status: in stock | |
02074-24C Název zboží: Swift 3,14m Wing joiner Carbon Price: 69,00€ Delivery status: in stock Ø 16mm; length 540mm; weight 140g. | |
02074-4 Název zboží: Swift S1 3,14m rudder Price: 62,00€ Delivery status: in stock fiberglass | |
0203016 Název zboží: Airbrakes 300mm (1 pair) Price: 53,00€ Delivery status: in stock Aerodynamic brakes for model up to 4,5 m wingspan. 1 pair | |
02074J-7 Název zboží: Swift s1 3,14 JEPPESEN Stickers Price: 49,50€ Delivery status: in stock | |
02074s Název zboží: Seat Swift Price: 49,00€ Delivery status: in stock fiberglass gelcoated | |
02074PD1DEL Název zboží: Panel instrument Swift Deluxe Price: 37,00€ Delivery status: in stock Assembled and fully equipped with board instruments. main panel instrument | |
02074-6 Název zboží: Canopy Swift S1 3,14m Price: 34,00€ Delivery status: in stock Material: Vivak® 1mm, transparent. | |
02074-6FIB Název zboží: Canopy Swift S1 3,14m fiberglass Price: 34,00€ Delivery status: in stock | |
5MA200110 Název zboží: ORACOVER 2m white (10) Price: 30,08€ Delivery status: in stock Weight: 89 g/m2 ; width is 60 cm; lenght 2m. | |
02074-5 Název zboží: Canopy frame Swift 3,14m Price: 29,00€ Delivery status: in stock fiberglass | |
02074-CB Název zboží: Cabling for Swift S1 3,14m wings TOPMODEL CZ Price: 22,40€ Delivery status: in stock | |
02074-6II Název zboží: Canopy Swift S1 3,14m II.QUALITY Recommended price: 34,00 (-50% discount) Price: 17,00€ Delivery status: in stock Material: Vivak® 1mm, transparent. II.QUALITY | |
02074PD2DEL Název zboží: Panel instrument Swift Deluxe Price: 17,00€ Delivery status: in stock Assembled and fully equipped with board instruments. panel instrument - 2.part | |
020910W Název zboží: 2K White paint 100ml + hardener TOPMODEL CZ Price: 13,30€ Delivery status: in stock 2K acrylic white paint used for laminating TOPMODEL CZ parts. | |
02074-6-01 Název zboží: Swift S1 Canopy hinge Price: 12,00€ Delivery status: in stock | |
1029052.1 Název zboží: Airtop pneumatic wheel Ø90 mm 1pc Price: 9,90€ Delivery status: in stock Pneumatic wheel Ø90 x 33mm. For wheel axle diameter Ø5 mm. Plastic hub. Notice: spare whell for retract gear | |
02074-DOOR Název zboží: Doors for sailplane retract gear Swift 3,14m Price: 9,90€ Delivery status: in stock pare doors for sailplane retract gear. | |
02074-23 Název zboží: Wing tip Swift S1 3,14m Price: 9,00€ Delivery status: in stock fiberglass | |
02074-1-21.2.22.23.24 Název zboží: Držáky serv Swift S1 3,14m Price: 7,00€ Delivery status: in stock držák serv výškovky, směrovky, vlečného háčku a podvozku | |
05013 Název zboží: Remote tow hook for up to wingspan 4,5 m Price: 6,80€ Delivery status: in stock Made in aluminium. To be glued inside the nose of the gliders (like the real one). A hook connected to the servo rotates in a slot, and in doing so, "capture" the towing cable.for gliders up to wingspan 4,5 m, Ø10mm, length 48mm | |
0203016.2 Název zboží: Cover plates for 300mm airbrakes (2pcs) Price: 6,50€ Delivery status: in stock Fiberglass cover plates for 300mm airbrakes. Unpainted. Set contains 2 pcs. Dimensions: 9,5 x 309 x 1 mm | |
02074-DOOR-PLATERED Název zboží: Plate for the production of Swift S1 retract gear door (red) Recommended price: 7,80 (-21% discount) Price: 6,20€ Delivery status: in stock Material: white gelcoated fiberglass. Engraving size: 48x121mm, total size approx. 90x170mm. | |
02074-DOOR-PLATEWHITE Název zboží: Plate for the production of Swift S1 retract gear door (white) Recommended price: 7,80 (-21% discount) Price: 6,20€ Delivery status: in stock Material: white gelcoated fiberglass. Engraving size: 48x121mm, total size approx. 90x170mm. | |
02074-DOOR-PLATEYELLOW Název zboží: Plate for the production of Swift S1 retract gear door (yellow) Recommended price: 7,80 (-21% discount) Price: 6,20€ Delivery status: in stock Material: white gelcoated fiberglass. Engraving size: 48x121mm, total size approx. 90x170mm. | |
02074-0 Název zboží: Head rest Fox, Swift Price: 4,00€ Delivery status: in stock fiberglass gelcoated 46 x 31 x 22 mm | |
03800 Název zboží: Clip fixing 2 pairs Price: 3,50€ Delivery status: in stock for wing fixing, plastic, 2 pairs. 2 pair ( 2 pcs into fuselage + 2 pcs into wing + 1x disconnect wedge for wings) | |
02074-6-02 Název zboží: Hatch latch Swift S1 Price: 3,20€ Delivery status: in stock Length 30mm, shaft Ø2mm. | |
05027 Název zboží: Wing servo mounts 18 mm (2 pairs) Price: 3,00€ Delivery status: in stock Polyurethan 18 mm, delivered in double pairs. Notice: for ailerons and flaps | |
N3047 Název zboží: Wheel Ø47 Price: 2,90€ Delivery status: in stock Ø47 x 18mm, díra Ø5 mm Cena za kus. Balení obsahuje redukční pouzdra ø3 a ø4. | |
02074-DSP Název zboží: Spring for closing the retract gear door Swift S1 2pcs Price: 2,24€ Delivery status: in stock Tension spring terminated by eyelets. Material: wire Ø0,5mm. Dimensions Ø5x36mm. Package content: 2pcs. | |
05018 Název zboží: Plastic servo covers Price: 2,15€ Delivery status: in stock For mini servo, ø 65 mm. Notice: for ailerons and flaps | |
2502 Název zboží: Pinned hinge 16x32 mm 6pcs Price: 1,84€ Delivery status: in stock The workmanship of the pinned hinge with the steel pin and six throughholes allows free movement with minimal passive resistance and a secure mounting with cyanoacrylate or epoxy glue into the wing, or if need be into the rudder and elevator of the model. The hinges are delivered mounted. 6pcs Notice: for door retract gear | |
181840 CAN9 Název zboží: Connector CAN 9 Price: 1,50€ Delivery status: in stock Two-Row connector, 9 PIN. Connector suitable for wiring of servos in the wing and fuselage. By using this connector is not necessary for each assembly / disassembly wing separate cables to connect the servos to the receiver. Price for 1 pair. | |
2290 BR Název zboží: Brass control horn M3 short 2 pcs Price: 1,44€ Delivery status: in stock Very small, aerodynamic clear, brass control horn for metal or plastic clevises (MPJ 2110, 2140). Content of package: 2 pcs Notice: for rudder | |
02074-2-8 Název zboží: Fiberglass control horn Swift S1 (for ailerons and flaps) Price: 1,30€ Delivery status: in stock Fiberglass 2mm Notice: for ailerons and flaps | |
02074-3-8 Název zboží: Fiberglass control horn Swift S1 (for elevator) Price: 1,30€ Delivery status: in stock Fiberglass 1,5mm Notice: for elevator | |
02074-1-24 Název zboží: Tow hook servo tray Swift S1 Price: 1,30€ Delivery status: in stock | |
519.1,5.1250 Název zboží: Steel wire 1.5mm, 1250mm Price: 1,10€ Delivery status: in stock Spring steel wire suitable for landing gears, wing joiners, shafts, struts, tailwheel systems, etc. Notice: pushrod for rudder | |
020CAN-01 Název zboží: Spacer pad for CAN9 and CAN15 connector Price: 0,70€ Delivery status: in stock | |
0205200 Název zboží: Ball 5 mm with a hole for M2 1Pc Price: 0,40€ Delivery status: in stock Notice: for Hatch latch | |
terc60 Název zboží: target Ø60mm stickers Price: 0,25€ Delivery status: in stock Notice: airbake servo top |
Tuning parts
020SFHI225 Název zboží: Servo frame for Hitec HS-225 Price: 4,20€ (recommended quantity: 4 pieces) Delivery status: in stock Ø 50mm; width: 19mm; 3d printing. Notice: 4x for ailerons | |
020SFHI82 Název zboží: Servo frame for Hitec HS-82, HS-81 Price: 4,00€ (recommended quantity: 2 pieces) Delivery status: in stock Ø 50mm; width: 15mm; 3d printing. Notice: 2x for airbrake |