|
|
Slash is small electric glider for sports flying. This airplane is especially designed for pilots who are looking for multipurpose fast sailplane. Strong enough for fast dives, but still light enough for thermal soaring. Slash has been re-designed for better flying characteristics with new classic balsa, built-up, D-box, rib/main spare wing design. Also included are the fiberglass gel-coated fuselage and balsa built-up tail parts. The synergy of low weight and strong structure is very unusual in a production sailplane and can only be achieved with careful attention to design and construction.
Virtually perfect, very well made and extremely clean entry level sailplane.
The model is designed and manufactured in Czech Republic. Spare parts are in stock.
Technical specifications:
|
|
|
|
|
|
|
RC equipment:
Servos: 4x micro servos for ailerons, elevator and rudder ( ES 08 MD II EMAX)
Motor: AXI 2217/12 V2 LONG
Controller: 35-45A ( e.g. SPIN 33 )
Spinner: "turbo" Ø 30mm (02030328TZ TOPMODEL CZ)
Prop: 8x6" CAM CARBON aero-naut
Accu: 3S LiPol 1 Ah
Kit contents:
- Elegant gel-coated fiberglass fuselage (cut for 30mm spinner) reinforced with carbon
- Fiberglass canopy
- Two-piece wing and rudder are manufactured in a balsa framework
- Full balsa elevator
- Top quality accessories (servo covers, servo mount, rods, ending ties, control horns, tape for sticking flaps, plywood servo mount to the tail, tow hook...)
- Complete assembly manual with step by step illustrations
Equipments required
3EL105615V2L Název zboží: AXI 2217/12 V2 LONG střídavý motor Price: 79,92€ Delivery status: in stock Ø27,7m x 44,4mm, RPM 1380/1V, weight 74g. Brushless outrunner new generation of extended tapered front edge for easy installation in gliders. For HOTLINER 900 g, power Lixx 2-3s, 3.17 mm shaft, controller 30-45A. | |
020134-PO Název zboží: Transport bags for Slash Price: 55,00€ Delivery status: in stock Bags for wings, elevator and rudder | |
5MA200122 Název zboží: ORACOVER 2m Bright red (22) Price: 30,08€ Delivery status: in stock Weight: 77 g/m2 ; width is 60 cm; lenght 2m. | |
3664 Název zboží: Accu LiPol Xpower 1000-3S HED (50C) Price: 26,47€ Delivery status: in stock 1000-3S (11,1V), 68x34x11 mm, 87 g Max. current load: 50C burst; Charging current up to 5C. Balance connector type JST-XH. | |
1834 Název zboží: Xcontroller XC45LITE (45A) Price: 22,41€ Delivery status: in stock | |
020134-7 Název zboží: Slash sticker Price: 18,90€ Delivery status: in stock Stickers sawed with using a plotter on transfer film. | |
02030328TZ Název zboží: Alu precision TURBO Z spinner 30/3,17/8 Price: 15,90€ Delivery status: in stock Alu precision spinners TURBO with Z shaped hub for folding props. Spinner Ø30 mm, collet 3,17mm, for blade root width 8 mm. | |
3531 Název zboží: Servo ES 08 MD II Price: 15,42€ (recommended quantity: 4 pieces) Delivery status: in stock 12g, metal gears, torque 2 kg/cm, speed 0.12 sec/60°(6V). dimensions:23 x 11,5 x 24 mm Notice: for: 2x aileron, 1x elevator, 1x rudder | |
723417 Název zboží: CAM CARBON 8x6", 20x15cm Price: 8,40€ Delivery status: in stock the width of the root 8mm for M3 screw, to 16.000 rev / min | |
UHU5146 Název zboží: UHU-Por 50ml Price: 4,38€ Delivery status: in stock Notice: for gluing the servo covers | |
0167823-0,25 Název zboží: Velcro fastener width 5cm; length 25cm Price: 1,80€ Delivery status: in stock self-adhesive Velcro with high-quality acrylic glue, both parts. Price per 25cm. Notice: for fixing the battery | |
0123456789 Název zboží: digit sticker Price: 1,40€ Delivery status: in stock Suitable for describing servoconnectors. Digit height is 5mm. | |
0123456789BW Název zboží: Digits (stickers) for labeling the connectors (Black/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. | |
0123456789RW Název zboží: Digits (stickers) for labeling the connectors (Red/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. | |
020CGSTICK Název zboží: Center of gravity mark Price: 1,20€ Delivery status: in stock 6pcs. Ø14mm, 8Pcs. Ø10mm. | |
KAV36.30090 Název zboží: Servo Cable Twisted Thin JR 0.14mm2 (PVC) Price: 0,80€ Delivery status: in stock Twisted three-core cable in JR colors (brown / red / orange) with PVC insulation, conductor cross-section 0.14 mm2. Highly flexible, strands of 72 mm 0.05 mm, max. 48 V, 3A. Diameter 1,0 / 1,9 mm. Made in Germany. Price for 1 meter Notice: 1m | |
020M3250 Název zboží: Tool for easy insertion of the motor into the fuselage M3x250mm 2 pcs Price: 0,48€ Delivery status: in stock threaded rod M3 x 250mm, 2 pcs |
Spare parts
020134-2ARF Název zboží: Slash 1,6m Wings ARF Price: 141,80€ Delivery status: in stock Part of the wing is small accessories for installation of servos. Covered Oracover® | |
020134-2ARC Název zboží: Slash 1,6m Wings (uncovered - ready to cover) Price: 108,40€ Delivery status: in stock Part of the wing is small accessories for installation of servos. | |
020134E-1 Název zboží: Fuselage Slash electro Price: 55,00€ Delivery status: in stock Probarvený laminát, délka 790mm, hmotnost cca 105g, oříznuto pro kužel Ø30mm, délka lože pro křídlo cca 170mm, délka lože pro výškovku 60mm. Trup je v základním provedení vyztužen uhlíkem. | |
020134-3ARF Název zboží: Slash elevator ARF Price: 18,50€ Delivery status: in stock Package contains: 1x elevator Covered Oracover®, 1x Fiberglass control horn (020134-3-8), 1x Nylon bolts M3x15 (1301), 1x Fiberglass pin Ø 1,5x10mm(FIBP-1,5x10), tapes (TAPE12). | |
020134-4ARF Název zboží: Slash rudder ARF Price: 13,90€ Delivery status: in stock Package contains: 1x rudder Covered Oracover®; 1 x fiberglass horn (020134-4-8); 2 x hinge (2500). | |
020134-3ARC Název zboží: Slash elevator (uncovered - ready to cover) Price: 13,20€ Delivery status: in stock Package contains: 1x elevator, 1x Fiberglass control horn (020134-3-8), 1x Nylon bolts M3x15 (1301), 1x Fiberglass pin Ø 1,5x10mm(FIBP-1,5x10), tapes (TAPE12). | |
020134-6 Název zboží: Canopy Slash Price: 13,00€ Delivery status: in stock Fiberglass gelcoated | |
020134-4ARC Název zboží: Slash rudder (uncovered kit - ready to cover) Price: 11,20€ Delivery status: in stock Package contains: 1x rudder; 1 x fiberglass horn (020134-4-8); 2 x hinge (2500). | |
TAPE12 Název zboží: Set of adhesive tapes for ailerons and flaps 5 m Price: 4,80€ Delivery status: in stock Set of adhesive tapes for ailerons and flaps. Length 5 m. | |
020SA2217 Název zboží: System preventing the contact of cables with the rotating casing of the motor (for AXI 2217 / ...LONG) Price: 3,00€ Delivery status: in stock System for the AXI 2217 /… LONG motor, which minimizes the contact of the cables with the rotating casing. It is suitable to add to the motor, which is installed in narrow fuselage and there is a danger that the cabling will meet the rotating casing. | |
020134-283848 Název zboží: Set of control horns for Slash Price: 2,40€ Delivery status: in stock Fiberglass 1mm | |
020134-2-4 Název zboží: Wing servo mounts 10 mm (plywood) Price: 2,40€ Delivery status: in stock plywood: 4Pcs. 8x10mm | |
05018-6 Název zboží: Plastic servo covers Price: 2,15€ Delivery status: in stock For micro servo, ø 58 mm, material:0,5mm, weight: 4g. | |
02061-1C Název zboží: Motor mount ø 29,4mm Bliss Price: 1,60€ Delivery status: in stock CNC cut fiberglass, ø 29,4×2 mm, for FEIGAO B20-15L + 4:1 | |
020137-1C Název zboží: Motor mount ø 29,4mm Kavan Price: 1,60€ Delivery status: in stock CNC cut fiberglass Ø29,4×2mm. For Kavan C28xx | |
02073-1C Název zboží: Motor mount ø 29,4mm Siesta Price: 1,60€ Delivery status: in stock CNC cut fiberglass, ø 29,4×2 mm, for gearbox MPJ 8060 | |
02040-1C Název zboží: Motor mount ø 29,4mm Stinger Price: 1,60€ Delivery status: in stock CNC cut fiberglass, ø 29,4×2 mm | |
020HET5W-1C Název zboží: Motor mount ø 29,7mm HET Typhoon EDF-5W Price: 1,60€ Delivery status: in stock CNC cut fiberglass Ø29,7×2mm | |
020134-4-3 Název zboží: Steven Slash Price: 1,60€ Delivery status: in stock material: balsa 6mm | |
1022 AL Název zboží: Mounting nut M4-low 4pcs Price: 1,56€ Delivery status: in stock Fixing nut low alloy mounting glue, thread M4. 4pcs Notice: for fixing the wing | |
zavit2025 Název zboží: Threaded rod M2 lenght 0,25m Price: 1,50€ Delivery status: in stock Length 0,25m. Notice: for aileron pushrod | |
2764 BR Název zboží: SNAP screw-lock pushrod connector 1 mm dia 2pcs Price: 1,48€ Delivery status: in stock They are designed for tight adjustable connection between pushrod and servo horn without soldering. Available in three different styles: SNAP type - recommended for direct use in 1,5 mm hole (MPJ 2758- 2759) or 1 mm (MPJ 2764-2765). The mount is very easy (only the push of Quicklock washer) but dismount is very difficult. Notice: ending of the elevator and rudder pushrod | |
1004 AL Název zboží: Mounting nut M3 4pcs Price: 1,44€ Delivery status: in stock Fixing nuts, aluminum alloy, assembly gluing, M3 thread. 4pcs Notice: for fixing the elevator | |
2500 Název zboží: Pinned hinge 11x28 mm 6 pcs Price: 1,20€ Delivery status: in stock The workmanship of the pinned hinge with the steel pin and six throughholes allows free movement with minimal passive resistance and a secure mounting with cyanoacrylate or epoxy glue into the wing, or if need be into the rudder and elevator of the model. The hinges are delivered mounted. 6pcs Notice: hinge for rudder | |
SET2108 Název zboží: Sets Pushrod (2x Bowden tube Ø 2/1mm + 2x Steel wire Ø 0,8mm) Price: 1,10€ Delivery status: in stock length 1m. Notice: for elevator and rudder | |
020134-24 Název zboží: Slash Wing joiner Price: 1,00€ Delivery status: in stock steel ∅4 x 240 mm | |
020134E-1-2 Název zboží: Tail servo tray Slash Electro Price: 0,99€ Delivery status: in stock plywood 4 x 35 x 50mm | |
1310 Název zboží: Nylon bolts M4x20 4pcs Price: 0,88€ Delivery status: in stock Designed to strengthen bearing surfaces, cowlings, etc. Available in black or white. 4pcs Notice: spare screw for wings | |
020134-2-31 Název zboží: Slash nut washer Price: 0,80€ Delivery status: in stock plywood 3 x 20 x 46 mm | |
1300 Název zboží: Nylon bolts M3x15 4pcs Price: 0,76€ Delivery status: in stock Designed to strengthen bearing surfaces, cowlings, etc. Available in black or white. 4pcs. Notice: spare screw for elevator | |
020134-2-8 Název zboží: Fiberglass control horn Slash for ailerons Price: 0,60€ Delivery status: in stock material: fiberglass 1mm | |
020134-4-8 Název zboží: Fiberglass control horn Slash for rudder Price: 0,60€ Delivery status: in stock material: fiberglass 1mm | |
020134-3-8 Název zboží: Fiberglass control horn Slash for elevator Price: 0,50€ Delivery status: in stock material: fiberglass 1mm | |
2100 Název zboží: Plastic clevis MICRO, l=17, slot width 1,2, pin o 1, M2 (2pcs) Price: 0,48€ Delivery status: in stock Clevis with a special metal pin. L=17mm, pin Ø1, M2. Available in black and white. 2pcs | |
PL-1612 Název zboží: Finland birch plywood 1x6x12mm 2pcs Price: 0,32€ Delivery status: in stock Notice: for mounting the canopy lock | |
FBT-201000 Název zboží: Fibreglass cloth-tape 20mm 150g/m2 (1m) Price: 0,30€ Delivery status: in stock The tape of glass cloth of 150 g / m2 for laminating repair reinforcements. 20 mm width, roll of 1m. Notice: for attaching the canopy lock | |
FIBP-2x127 Název zboží: Fiberglass pin 2x127mm 1Pc Price: 0,20€ Delivery status: in stock Notice: to secure the canopy | |
FIBP-3x40 Název zboží: Fiberglass pin 3x40mm 2Pcs. Price: 0,15€ Delivery status: in stock Notice: spare pins for wing | |
020134E-1-3 Název zboží: Balsa prism 4x7x50mm Price: 0,12€ Delivery status: in stock | |
FIBP-1.5x8 Název zboží: Fiberglass pin 1,5x8mm 2Pcs. Price: 0,12€ Delivery status: in stock Notice: spare pin for elevator | |
FIBP-2x20 Název zboží: Fiberglass pin 2x20mm 2Pcs. Price: 0,12€ Delivery status: in stock Notice: spare pin for wings |
Tuning parts
020134-6C Název zboží: Canopy Slash (CARBON) Price: 17,50€ Delivery status: in stock |