|
|
The maquette of the well known glider in scale 1: 4th.
VENTUS 2cx is supplied in ARF verzion, its Coated with foil Oracover®.
The model has an operated ailerons (using 2 servos), flaps (4 servos), air brakes (2 servos) elevator (1 servo), rudder (1 servo), tow hook (1servo STD), retract gear (1 servo).
De-luxe verzion:
- completely assembled and deposed model
- The fuselage has inbuilt connectors and cables for aileron servos. The landing and air brakes, clutch housing of the wing, cabin including scale modeling closing, instrument panel and seats are also built in the fuselage. The rudder is attached to the fuselage with a control horn and bowden.
- It contains the locking system of the wings against ejection. The tow hook, retractable landing gear on the tail wheel are also included.
- The wing has mounted ailerons, flaps, air brakes, including servo cables, connecting cables to the fuselage and the system of locking the wings against the collateral eject.
- high quality vinyl stickers are stuck on the model
This model is completely made in the Czech Republic. The spare parts are in stock.
Technical specification:
|
|
|
|
|
|
|
RECOMMENDED SERVOS FOR |
4,8V |
7,4V |
AILERONS 2X | HS-85 MG (Hitec) | HS-5087 MH (Hitec) |
FLAPS 4X | HS-85 MG (Hitec) | HS-5087 MH (Hitec) |
ELEVATOR 1x | HS-85 MG (Hitec) | HS-5087 MH (Hitec) |
RUDDER 1x | HS-85 MG (Hitec) | HS-5087 MH (Hitec) |
AIRBRAKES 2x | HS-82 MG (Hitec) | HS-5087 MH (Hitec) |
TOW HOOK 1x | HS-645 MG (Hitec) | D625MW (Hitec) |
RETRACT GEAR 1x | HS-645 MG (Hitec) | D625MW (Hitec) |
Suitable setup for take off from the take-off dolly:
|
The de luxe ARF kit contents:
- fiberglass, white colored fuselage with sliding cabin, fiberglass seat and dashboard panel, these parts are already instaled
- The wing : the center of the wing is made of polystyrene, coated with a veneer, reinforced with glass fiber and carbon flange. The construction is supplemented by beams which are connecting the top and bottom of the cover. The enclosure for mounting winglets, winglets, wing flaps and the brake shields are also installed. The wing is coated by Oracover® foil.
- white through-colored fiberglass elevator
- white through-colored fiberglass rudder
- white through-colored fiberglass wing tip
- fiberglass frame of the cabin with glued clear cabin. The maquette window and closing is also installed
- building instructions
- iron wing joiner
- small accessories
Equipments required
02043-POTEXT Název zboží: Transport bags for Ventus 2cx Price: 319,00€ Delivery status: in stock The bags are made of very durable multi-layer materials. Set includes: bag for wing, fuselage, elevator and wing joiner. | |
JSP-75-O Název zboží: SPIN 75 PRO OPTO Price: 156,30€ Delivery status: in stock Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC). | |
5050EA-12 Název zboží: Xmotor XM5050EA-12 V3 Price: 110,50€ Delivery status: in stock Outrunner brushless electric motor. Ø49.5mm x 48.2mm, RPM 610/1V, weight 290g, Max. 70A (15S), input voltage Lixx 5-6s, shaft 6 mm. | |
KAV33.6052 Název zboží: KAVAN Li-Po 4700mAh/18,5V 40/80C, 86,9Wh Price: 90,32€ Delivery status: in stock at supplier KAVAN LiPo high performance power pack 40/80C, charge rate up to 2C. Five-cell pack 5s1p 18.5V 4700 mAh, dimensions: 140x43x45mm, weight: 545g, JST-XH balance connector. | |
020D01 Název zboží: Sailplane Take-off Dolly I Price: 82,00€ Delivery status: in stock Kit of Sailplane Take-off Dolly for models with a fuselage width up to 219 mm. | |
0200192 Název zboží: GM Scale spinner 44,5/6 white Price: 69,00€ Delivery status: in stock Precision carbon spinner for folding prop Ø44,5 mm, collet 6,0 mm, for blade root width 8 mm. Weight: 20g. | |
02057SP Název zboží: Polystyrene 1:4 sailplane pilot Jan Price: 63,00€ Delivery status: in stock Quarter scale sailplane pilot doll. Hand painted. Designed for Discus 2a, Discus 2c, Ventus 2cx. Weight: 39g. | |
020SERVISEG Název zboží: Construction Service (Installation of EG tow hook in Discus, Ventus, Swift and Fox fuselages) Price: 49,90€ Delivery status: in stock The price includes the towing hook (item no. 020201EG) and gluing to the fuselage, see picture. Also included is a tow hook servo tray (item no. 20201EG.ST). We recommend this service if the model is equipped with a motor, but you would like to keep the possibility of getting the model into the air by towing. Notice: for the combination of motor and tow hook | |
1HI38801 Název zboží: D625MW rychlé a silné digi servo (10kg) Price: 42,13€ (recommended quantity: 2 pieces) Delivery status: in stock Rychlé digi servo s kovovými převody nové generace s elektronikou s bleskurychlou odezvou pro všeobecné použití. Programovatelné, napájení 4,8-7,4V. Tah 6,3kg.cm, rychlost 0,20s/60°při 4,8V, tah 10kg.cm, rychlost 0,13s/60° při 7,4V. Náhrada HS-5625MG a HS-5665MH. Notice: 7,4V for: 1x tow hook, 1x retract gear | |
1HI3181 Název zboží: HS-5087 MH HiVolt DIGITAL Price: 40,12€ (recommended quantity: 10 pieces) Delivery status: in stock Silné digitální mikroservo 22g s kovovými převody a zvýšeným napájecím napětím (až 2S LiPo) pro elektrolety a větroně. 1xBB, tah 4,3 kg/cm, rychlost 0,13s/60st při 7,4V. Programovatelné. Notice: 7,4V for: 2x aileron, 4x flap, 2x airbrake, 1x elevator, 1x rudder | |
020SERVISVENTUS Název zboží: Construction Service (Cutting the nose of the Ventus fuselage for 44,5mm GM spinner including gluing the motor mount) Price: 37,80€ Delivery status: in stock The used motor mount is intended for the recommended Dualsky 5050 motor. If you are interested in gluing the motor mount for another motor, please contact us. | |
020GM14.8W Název zboží: GM 14 X 8 F (White) Price: 36,70€ Delivery status: in stock Carbon folding prop 14x8", blade root width 8 mm, the pin dia. 3mm. | |
1HI3115-1x Název zboží: HS-645 MG bulk 1pc unpacked Price: 34,00€ (recommended quantity: 2 pieces) Delivery status: in stock 50 g standard servo with metal gears with increased Torque for larger models, cars 1:8. 2xBB, thrust 7.7 kg / cm, Speed 0.24 to 4.8 V. s/60st Notice: 4,8V for: 1x tow hook, 1x retract gear | |
1HI3050-1x Název zboží: HS-85 MG Bulk 1pc Price: 28,40€ (recommended quantity: 8 pieces) Delivery status: in stock Strong microservo 21g with metal gears for electric planes and sailplanes. 1xBB, torque 3,0 kg/cm, speed 0,16s/60st in 4,8 V. Notice: 4,8V for: 2x aileron, 4x flap, 1x elevator, 1x rudder | |
1HI3042-1x Název zboží: HS-82 MG Bulk 1pc Price: 23,10€ (recommended quantity: 2 pieces) Delivery status: in stock Unpacked fast microservo 19g with metal gears for small electric planes and sailplanes. Torque 2,6 kg/cm, speed 0,11s/60st in 4,8 V Notice: 4,8V for: 2x airbrakes | |
020201EG Název zboží: Tow hook EG Price: 13,90€ Delivery status: in stock For FES (Front Electric Sustainer) model version . Dimensions: 50x20x8mm, pushrod Ø3mm. Notice: for the combination of motor and tow hook | |
02043-ON Název zboží: Protective sleeve for Ventus 2cx canopy Price: 12,00€ Delivery status: in stock Protective sleeve to prevent scratching during storing and transporting the model. | |
1HI7165 Název zboží: Servo lock HS-80/81/82/85/5087 Price: 8,80€ (recommended quantity: 3 pieces) Delivery status: in stock "Dish" with cap and aerodynamic cover rod. 1 pair. Notice: for ailerons & flaps servos | |
020201EG.ST Název zboží: Servo tray for EG tow hook Price: 4,25€ Delivery status: in stock For standard servo. Suitable for EG tow hook for Discus 2a, Discus 2c, Ventus 2cx, Swift S1 3.73m, Swift 3.14m. Notice: for tow hook EG | |
05056307 Název zboží: Plastic servo covers HS 81/82 Price: 3,00€ Delivery status: in stock For micro servo, Ø 58 mm Notice: complement part of servo mount for outer ailerons | |
0167823-0,25 Název zboží: Velcro fastener width 5cm; length 25cm Price: 1,80€ Delivery status: in stock self-adhesive Velcro with high-quality acrylic glue, both parts. Price per 25cm. Notice: for fixing the battery, receiver, etc. | |
0123456789 Název zboží: digit sticker Price: 1,40€ Delivery status: in stock Suitable for describing servoconnectors. Digit height is 5mm. | |
0123456789BW Název zboží: Digits (stickers) for labeling the connectors (Black/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. | |
0123456789RW Název zboží: Digits (stickers) for labeling the connectors (Red/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. | |
020CGSTICK Název zboží: Center of gravity mark Price: 1,20€ Delivery status: in stock 6pcs. Ø14mm, 8Pcs. Ø10mm. |
Spare parts
02043-1DL Název zboží: Fuselage Ventus 2cx Deluxe Price: 577,00€ Delivery status: in stock Completely fitted fuselage (equipped with canopy+frame, towing hook, retractable landing gear, connectors with cables, seat, dashboard, rudder). Covered with stickers. White fiberglass. Length 1610 mm. | |
02043-2DL Název zboží: Ventus 2cx 4,5 m ARF DELUXE Wings Price: 525,40€ Delivery status: in stock Wingsnap 4,5m.. Wings with metallic airbrakes installed. Wing fixing device already installed and servos connector also. Wingspan Oracover®.Stickers are sticked on wings. | |
02043-2ARFSTANDARD Název zboží: Ventus 2cx 4,5 m ARF STANDARD Wings Price: 486,50€ Delivery status: in stock Wings with metallic airbrakes installed. Covered Oracover® . | |
02043-2ARCSTANDARD Název zboží: Ventus 2cx 4,5m STANDARD Wings (uncovered - ready to cover) Price: 417,00€ Delivery status: in stock Wings with metallic airbrakes installed.not covered. | |
02043-1 Název zboží: Fuselage Ventus 2cx Price: 205,00€ Delivery status: in stock fiberglass white gelcoated, délka 1535 mm | |
5MA201110 Název zboží: ORACOVER 10m White (10) Price: 140,16€ Delivery status: in stock Weight: 89 g/m2 ; width is 60 cm; lenght 10m. | |
02043-6DL Název zboží: Canopy Ventus 2cx De luxe 4,5 m Price: 128,00€ Delivery status: in stock Set including closing window. Material: Vivak® 1mm, transparent. | |
020116390 Název zboží: Sailplane retract gear ø 90mm Price: 104,00€ Delivery status: in stock For model on a scale 1:4 and to weight 6 kg. | |
02043-3 Název zboží: Ventus 2cx elevator Price: 69,00€ Delivery status: in stock fibreglass laminate elevator. Length 623mm. Weight 98g. The package includes 1x elevator and 1 x 2290 BR. | |
0203016 Název zboží: Airbrakes 300mm (1 pair) Price: 53,00€ Delivery status: in stock Aerodynamic brakes for model up to 4,5 m wingspan. 1 pair | |
02043PDDEL Název zboží: Panel instrument Ventus 2cx Deluxe Price: 46,00€ Delivery status: in stock fiberglass gelcoated | |
02043s Název zboží: Seat Ventus 2cx Price: 46,00€ Delivery status: in stock fiberglass gelcoated | |
02043-6-14 Název zboží: Canopy Ventus 2cx with window 1:4 Price: 42,00€ Delivery status: in stock Canopy with installed 1:4 scale window. Material: Vivak® 1mm, transparent. | |
02043-4 Název zboží: Ventus rudder 2cx Price: 32,00€ Delivery status: in stock White engrained laminate, spare part. The package includes 1x rudder and 1x 2290 BR. | |
5MA200110 Název zboží: ORACOVER 2m white (10) Price: 30,08€ Delivery status: in stock Weight: 89 g/m2 ; width is 60 cm; lenght 2m. | |
02043-6 Název zboží: Canopy Ventus 2cx Price: 29,50€ Delivery status: in stock Material: Vivak® 1mm, transparent. | |
02043-5 Název zboží: Canopy frame Ventus 2cx Price: 29,00€ Delivery status: in stock fiberglass | |
02043-CB Název zboží: Cabling for Ventus 2cx wings TOPMODEL CZ Price: 28,60€ Delivery status: in stock | |
02043-23 Název zboží: Wing tip Ventus 2cx Price: 28,00€ Delivery status: in stock 1 pair, 72 mm width at the root, airfoil HQ 3/12 | |
02043PD Název zboží: Panel instrument Ventus 2cx Price: 26,00€ Delivery status: in stock fiberglass gelcoated. Dashboards are delivered in Half state for easy installation onboard instruments. | |
0202043-PR Název zboží: Ventus 1:4 set of instruments Price: 19,70€ Delivery status: in stock | |
02043-6II Název zboží: Canopy Ventus 2cx II.QUALITY Recommended price: 29,50 (-40% discount) Price: 17,70€ Delivery status: in stock Material: Vivak® 1mm, transparent. II.QUALITY | |
02043-7 Název zboží: Ventus 2cx - 4,5m stickers Price: 16,90€ Delivery status: in stock Stickers sawed with using a plotter on transfer film for Ventus 2cx - 4,5m wingspan. | |
02043-7.2cxM Název zboží: Ventus 2cx M D-KBTL 4,5m stickers Price: 16,90€ Delivery status: in stock Stickers sawed with using a plotter on transfer film for Ventus 2cx M D-KBTL - 4,5m wingspan. | |
02043-24 Název zboží: Ventus 2cx Wing joiner Price: 14,90€ Delivery status: in stock Material : steel; Length : 440mm; diameter : 12mm; weight : 393g. | |
020910W Název zboží: 2K White paint 100ml + hardener TOPMODEL CZ Price: 13,30€ Delivery status: in stock 2K acrylic white paint used for laminating TOPMODEL CZ parts. | |
1029052.1 Název zboží: Airtop pneumatic wheel Ø90 mm 1pc Price: 9,90€ Delivery status: in stock Pneumatic wheel Ø90 x 33mm. For wheel axle diameter Ø5 mm. Plastic hub. Notice: spare whell for retract gear | |
02043-DOOR Název zboží: Doors for sailplane retract gear Ventus 2cx Price: 9,90€ Delivery status: in stock Spare doors for sailplane retract gear. | |
02057-cabinlatch Název zboží: Cabin latch Discus 2c, Discus 2a, Ventus 2cx Price: 8,10€ Delivery status: in stock | |
05013 Název zboží: Remote tow hook for up to wingspan 4,5 m Price: 6,80€ Delivery status: in stock Made in aluminium. To be glued inside the nose of the gliders (like the real one). A hook connected to the servo rotates in a slot, and in doing so, "capture" the towing cable.for gliders up to wingspan 4,5 m, Ø10mm, length 48mm | |
0203016.2 Název zboží: Cover plates for 300mm airbrakes (2pcs) Price: 6,50€ Delivery status: in stock Fiberglass cover plates for 300mm airbrakes. Unpainted. Set contains 2 pcs. Dimensions: 9,5 x 309 x 1 mm | |
02043-DOOR-PLATE Název zboží: Plate for the production of Ventus 2cx retract gear door Price: 5,90€ Delivery status: in stock Material: white gelcoated fiberglass. Dimensions: approx. 80x125mm | |
0492004 Název zboží: Sliding canopy window 1:4 Price: 5,60€ Delivery status: in stock Sliding window, scale 1:4. | |
TAPE12 Název zboží: Set of adhesive tapes for ailerons and flaps 5 m Price: 4,80€ Delivery status: in stock Set of adhesive tapes for ailerons and flaps. Length 5 m. | |
02020-6-5 Název zboží: Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (front + rear) Price: 4,50€ Delivery status: in stock fiberglass | |
03800 Název zboží: Clip fixing 2 pairs Price: 3,50€ Delivery status: in stock for wing fixing, plastic, 2 pairs. 2 pair ( 2 pcs into fuselage + 2 pcs into wing + 1x disconnect wedge for wings) | |
05028 Název zboží: Wing servo mounts 13 mm (2 pairs) Price: 2,60€ Delivery status: in stock Polyurethan 13 mm, delivered in double pairs. Notice: Wing servo mounts for Airbrakes | |
70180 BR Název zboží: Ms screw countersunk head screws, M1,2x4 10pcs Price: 2,32€ Delivery status: in stock Precision turning the screw M1,2 countersunk head straight flute, CSN 021151 Shape B (DIN 963). Thread rolling, the material CW614N brass, thread length 3 mm, head diameter 2.6 mm, the width of the straight grooves 0.4 mm. Contents: 10 pcs. Notice: spare screw of the cabin window | |
02020-DSP Název zboží: Spring for closing the retract gear door (Discus 2a, Discus 2c, Ventus 2cx) 2pcs Price: 2,24€ Delivery status: in stock Tension spring terminated by eyelets. Material: wire Ø0,5mm. Dimensions Ø5x47mm. Package content: 2pcs. | |
N3037 Název zboží: Wheel Ø37 Price: 2,00€ Delivery status: in stock Ø37 x 15mm hole Ø3 mm Price per piece. | |
0200GFLAG Název zboží: Germany flag 2pcs Price: 1,85€ Delivery status: in stock dimensions: 51x36mm, color: black / red / gold | |
2502 Název zboží: Pinned hinge 16x32 mm 6pcs Price: 1,84€ Delivery status: in stock The workmanship of the pinned hinge with the steel pin and six throughholes allows free movement with minimal passive resistance and a secure mounting with cyanoacrylate or epoxy glue into the wing, or if need be into the rudder and elevator of the model. The hinges are delivered mounted. 6pcs Notice: for door retract gear | |
182040 CAN15 Název zboží: Connector CAN 15 Price: 1,80€ Delivery status: in stock Three-Row connector, 15 PIN. Connector suitable for wiring of servos in the wing and fuselage. By using this connector is not necessary for each assembly / disassembly wing separate cables to connect the servos to the receiver. Price for 1 pair. | |
02043-7INSCV2CX Název zboží: Lettering sticker under canopy for Ventus 2cx (2Pcs) Price: 1,60€ Delivery status: in stock | |
02020-4-1 Název zboží: Hinge for fixing the Discus 2a (Discus 2c, Ventus 2cx) rudder Price: 1,50€ Delivery status: in stock material: PVC | |
2290 BR Název zboží: Brass control horn M3 short 2 pcs Price: 1,44€ Delivery status: in stock Very small, aerodynamic clear, brass control horn for metal or plastic clevises (MPJ 2110, 2140). Content of package: 2 pcs Notice: for airlerons, flaps, elevator and rudder | |
1004 AL Název zboží: Mounting nut M3 4pcs Price: 1,44€ Delivery status: in stock Fixing nuts, aluminum alloy, assembly gluing, M3 thread. 4pcs Notice: nut for airlerons and flaps | |
02020-6-3 Název zboží: Canopy hinge shaft Discus 2c, Discus 2a, Ventus 2cx Price: 1,30€ Delivery status: in stock | |
02020-1-24 Název zboží: Tow hook servo tray (Discus 2a, Discus 2c, Ventus 2cx) Price: 1,30€ Delivery status: in stock | |
519.1,5.1250 Název zboží: Steel wire 1.5mm, 1250mm Price: 1,10€ Delivery status: in stock Spring steel wire suitable for landing gears, wing joiners, shafts, struts, tailwheel systems, etc. Notice: pushrod for rudder | |
8GR3009 Název zboží: Servo Cable Twisted Thick JR 0.25mm2 Price: 1,04€ Delivery status: in stock Twisted Servocable (three-row) 0,25mm². Price per common meter. 1 m Weight 13 grams. | |
020CAN-01 Název zboží: Spacer pad for CAN9 and CAN15 connector Price: 0,70€ Delivery status: in stock | |
terc60 Název zboží: target Ø60mm stickers Price: 0,25€ Delivery status: in stock Notice: airbrake srvo top |