|
|
Powerful, accurate and particularly powerful digital servo standard size with metal gears and the output shaft is supported in two ball bearings. The increased voltage (up to 7.4 V, 2S Li-Poly / Li-Fe) is very simple to implement on-board electronics with 2.4GHz receiver Optima series with the power of dvoučlánku Li-poly or Li-Fe without the need for additional stabilizers or regulators .
Thanks prachutěsnému a waterproof case (resistance according to International Protection Code IP-67 - completely prevents contact with dust, withstands immersion in water up to 1 meter for 30 min test run) is particularly suitable for off-road model cars, ships and submarines - simply places exposed to dust and moisture, with high demands on the power stroke and overall mechanical performance servo.
Hacker digital servos Hitec HFP-10 *, HFP-20, HFP-25, HPP-21 or HPP-21 Plus can be programmed:
reset to the factory defaults,
width of deadband
Direction of rotation
rotational Speed
neutral
The travel
on or off, fail-safe
emergency settings deflection fail-safe
servo protection against overload (power limitation 0-50% overload)
*) Note .: Hacker older type HFP-10 program is not possible protection against overload.
Standard Size Servo
Type of digital servo
Move at 6.0V [kg / cm] 11.3
Move at 7.4V [kg / cm] 12.9
Speed at 6.0V [s / 60st.] 0.2
Speed at 7.4V [s / 60st.] 0.18
Metal Gears Servo
Ball bearings 2xBB
high-voltage yes
[V] 6 - 7.4
Length [mm] 41.8
Width [mm] 21
Height [mm] 40
Weight [g] 61
Designed for aircraft, terrain cars, sailboats, boats
Equipments required
1HI3306 Název zboží: HFP-30 Price: 75,90€ Delivery status: in stock Programátor digitálních serv HITEC (všech řad) a servotester. Pro programování digitálních serv HITEC sérií HS-5xxx, HS-7xxx, HSB-9xxx, Dxxx a testování všech typů serv (digitálních i analogových). Možnost synchronního programovánání dvou serv, měření šířky a střídy řídících pulsů a mnoho dalších funkcí. | |
KAV20.3712 Název zboží: Servo arm Double 114mm (4,5") 25teeth M3 Price: 16,83€ Delivery status: in stock at supplier Aluminium double servo arm with offset for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between M3 holes: 114mm ; 102mm ; 89mm ; 76,5mm ; 63,5mm. | |
1HI33012 Název zboží: DPC-11 Universal Programmer Hitec servos with PC interface (mini-USB) Price: 16,02€ Delivery status: in stock Universal interface for PC software programmer and servo tester for all programmable servos Hitec (classic and brushless). Allows you to adjust the size of deflections, neutral, fail-safe, speed, direction of rotation, deadband, soft start. | |
2DH0034-2 Název zboží: Full Arm offset 24T HITEC 4.5" M3 (black) Price: 16,02€ Delivery status: in stock at supplier Professional 24-tooth servo lever with offset for Hitec HS-5xxx / 7xxx servos. Made of aluminum and ready to use M3 ball joints. Hole Pitch: 114mm; 102mm; 89mm; 76.5mm; 63,5mm for servos | |
KAV20.3711 Název zboží: Servo arm Double 89mm (3,5") 25teeth M3 Price: 16,02€ Delivery status: contact us Aluminium double servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between M3 holes: 89mm ; 76,5mm ; 63,5mm. | |
2DH0037 Název zboží: Full Arm 24T HITEC 3.5" M3 (black) Price: 15,22€ Delivery status: in stock at supplier Professional double-sided 24-tooth servo lever for Hitec HS-5xxx / 7xxx servos. Made of aluminum and ready to use M3 ball joints. Hole Pitch: 89mm; 76.5mm; 63,5mm | |
KAV20.3706 Název zboží: Servo arm 51mm (2") 25teeth M3 Price: 13,21€ Delivery status: contact us Aluminium servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between servo shaft and M3 holes: 36mm ; 42,5mm ; 51mm. | |
KAV20.3710 Název zboží: Servo arm Double 64mm (2,5") 25teeth M3 Price: 13,21€ Delivery status: contact us Aluminium double servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between M3 holes: 64mm ; 50mm ; 38mm. | |
2DH0053 Název zboží: Full Arm 24T HITEC 2.5" M3 (black) Price: 12,01€ Delivery status: in stock at supplier Professional double-sided 24-tooth servo lever for Hitec HS-5xxx / 7xxx servos. Made of aluminum and ready to use M3 ball joints. Hole Pitch: 63.5mm; 50mm; 38mm | |
KAV20.3705 Název zboží: Servo arm 45mm (1,75") 25teeth M3 Price: 11,61€ Delivery status: contact us Aluminium servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between servo shaft and M3 holes: 45mm ; 38mm ; 32mm. | |
2DH0094-2 Název zboží: Side Servo Mount V2 Price: 11,20€ Delivery status: in stock at supplier Standard size servo holder | |
KAV20.3704 Název zboží: Servo arm 38mm (1,5") 25teeth M3 Price: 10,80€ Delivery status: in stock at supplier Aluminium servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between servo shaft and M3 holes: 38mm ; 32mm. | |
KAV20.3701 Název zboží: Servo arm 32mm (1,25") 25teeth M2 Price: 10,40€ Delivery status: in stock at supplier Aluminium servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between servo shaft and M3 holes: 32mm ; 25,5mm. | |
KAV20.3703 Název zboží: Servo arm 32mm (1,25") 25teeth M3 Price: 10,40€ Delivery status: in stock at supplier Aluminium servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between servo shaft and M3 holes: 32mm ; 25,5mm. | |
KAV20.3702 Název zboží: Servo arm 25mm (1") 25teeth M3 Price: 9,60€ Delivery status: in stock at supplier Aluminium servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between servo shaft and M3 hole: 25mm. | |
KAV20.3915 Název zboží: Carbon control horn 110 x 31mm Price: 5,98€ Delivery status: in stock at supplier Two-arm universal arc carbon lever for servos 110x31 mm, center hole 9 mm. For screwing onto standard plastic servo blades. | |
KAV20.3911 Název zboží: Carbon control horn 110 x 22mm Price: 3,98€ Delivery status: in stock at supplier Two-arm universal carbon lever for servos 110x22 mm, center hole 8 mm. For screwing onto standard plastic servo blades. | |
KAV36.2005 Název zboží: Extension Cable Twisted 120cm JR with lock Price: 3,57€ Delivery status: in stock at supplier Twisted servo extension cable with JR connectors. Lenght 1200mm. PVC insulation. Cable cross section 0,33mm2 / 22AWG. Male connector with lock | |
KAV20.3913 Název zboží: Páka serva uhlíková jednoramenná 66 x 22,5mm Price: 3,57€ Delivery status: in stock at supplier Jednoramenná univerzální uhlíková páka pro serva 66x22.5 mm, středový otvor 7 mm. Pro našroubování na standardní plastové kotouče serv. | |
2DH0066 Název zboží: Servo hold-down washer (8pcs) Price: 3,57€ Delivery status: contact us High quality aluminum washers for servo mounting. | |
KAV36.2210 Název zboží: Extension Cable 75cm JR with lock Price: 3,17€ Delivery status: in stock Flat servo extension cable with JR connectors. Lenght 750mm. PVC insulation. Cable cross section 0,33mm2 / 22AWG. Male connector with lock | |
KAV36.2211 Název zboží: Extension Cable 90cm JR with lock Price: 3,17€ Delivery status: in stock at supplier Flat extension cable with 900 mm JR connectors with PVC insulation, 0.25 mm2 conductor cross section. The socket (counterpart) is fitted with a snap-on fuse to secure the connector connection. | |
KAV36.2007 Název zboží: Extension Cable Twisted 90cm JR with lock Price: 3,17€ Delivery status: in stock Twisted, strong extension cable with 900 mm JR connectors with PVC insulation, 0.25 mm2 conductor cross section. The socket (counterpart) is fitted with a snap-on fuse to secure the connector connection. | |
KAV20.3914 Název zboží: Carbon control horn 40x21mm Price: 2,77€ Delivery status: in stock at supplier Single arm universal carbon servo lever 40x21 mm, center hole 9 mm. For screwing onto standard plastic servo blades. | |
KAV20.3916 Název zboží: Carbon control horn 53 x 20 Price: 2,77€ Delivery status: in stock at supplier Single arm universal arc carbon lever for servos 53x20 mm, center hole 9 mm. For screwing onto standard plastic servo blades. | |
KAV20.3912 Název zboží: Carbon control horn 60 x 22,5mm Price: 2,77€ Delivery status: in stock at supplier Two-arm universal carbon lever for servos 60x22.5 mm, center hole 7 mm. For screwing onto standard plastic servo blades. | |
KAV36.2207 Název zboží: Extension Cable 30cm JR with lock Price: 2,77€ Delivery status: in stock Flat extension cable with 300 mm JR connectors with PVC insulation, 0.25 mm2 conductor cross section. The socket (counterpart) is fitted with a snap-on fuse to secure the connector connection. | |
KAV36.2004 Název zboží: Extension Cable Twisted 60cm JR with lock Price: 2,77€ Delivery status: in stock Twisted, strong extension cable with 600 mm JR connectors with PVC insulation, 0.25 mm2 conductor cross section. The socket (counterpart) is fitted with a snap-on fuse to secure the connector connection. | |
KAV36.2208 Název zboží: Extension Cable 45cm JR with lock Price: 2,37€ Delivery status: in stock Flat extension cable with 450 mm JR connectors with PVC insulation, 0.25 mm2 conductor cross section. The socket (counterpart) is fitted with a snap-on fuse to secure the connector connection. | |
KAV36.2209 Název zboží: Extension Cable 60cm JR with lock Price: 2,37€ Delivery status: in stock Flat extension cable with 600 mm JR connectors with PVC insulation, 0.25 mm2 conductor cross section. The socket (counterpart) is fitted with a snap-on fuse to secure the connector connection. | |
KAV36.2003 Název zboží: Extension Cable Twisted 30cm JR with lock Price: 2,37€ Delivery status: in stock Twisted thick extension cable with 300 mm JR connectors with PVC insulation, 0.25 mm2 conductor cross section. The socket (counterpart) is fitted with a snap-on fuse to secure the connector connection. | |
KAV20.3700 Název zboží: Servoscrew M3x6 10pcs Price: 2,37€ Delivery status: in stock at supplier Screw for screwing into standard servo with metal gears to fix the lever. Hexagon socket head, black. The package is 10pcs. | |
KAV36.2206 Název zboží: JR010 Extension Cable 15cm JR Price: 1,97€ Delivery status: in stock Plochý prodlužovací kabel s konektory JR o délce 150 mm s PVC izolací, průřez vodičů 0,25 mm2. Zásuvka (protikus) je opatřena zacvakávací pojistkou pro zajištění spojení konektorů. | |
KAV36.2205 Název zboží: Extension Cable 10cm JR with lock Price: 1,57€ Delivery status: in stock Flat extension cable with 100 mm JR connectors with PVC insulation, 0.25 mm2 conductor cross section. The socket (counterpart) is fitted with a snap-on fuse to secure the connector connection. |
Spare parts
1HI5118 Název zboží: 5305 Převody serva 5646WP/HS-646WP Price: 19,64€ Delivery status: contact us | |
1HI7121 Název zboží: 5709 Sada pák Price: 5,18€ Delivery status: in stock at supplier Masivní páky pro silná serva včetně upevňovacích silentbloků |