|
|
Technická data
|
|
|
|
|
|
|
The EP glider Q12x is the super-lightweight version of our Q12. The pod is made of kevlar-Carbon fabric. The cross-section is very small, the weight is low.
The pod can accept battery ca. 1200-2S.
The tail servos are under the wing. Due the size of the pod, the low-profile servos Dymond D47 must be used.
The RTF weight is from 500 grams only.
The tail servos are under the wing. Due the size of the pod, the low-profile servos Dymond D47 must be used.
The RTF weight is from 500 grams only.
The Q12 takes use from our long-years experience with DLG models. The gliders, made with the foam/skin technology, flew much better, than those stick and film types. The main reason was seemingly the overall improvement of aerodynamic properties.
The foam/skin design provides much higher rigidity. The A/R can be very high. The ailerons and brakes will not warp. The A/R is about same as that of free flight power models.
Each half of the wing is made as single part. The dihedral is built in during the molding process.
The foam/skin design provides much higher rigidity. The A/R can be very high. The ailerons and brakes will not warp. The A/R is about same as that of free flight power models.
Each half of the wing is made as single part. The dihedral is built in during the molding process.
Equipments required
JSP-33 Název zboží: SPIN 33 PRO Price: 81,30€ Delivery status: in stock SPIN pro controller include a new type of voltage stabilizer for receiver and servos, the so called switching BEC with an output voltage of 5.5 V. The use of this feature opens the way to the use of BEC for models operating at higher voltages. A significant factor is that the BEC circuit maintains its full current capability right up to the maximum voltage. | |
0201509 Název zboží: Alu precision spinners 32/3,17/8 Price: 13,00€ Delivery status: in stock Spinner ø 32/3,17 mm, for blade root width 8 mm. | |
723928 Název zboží: CAM CARBON 10x6" Z, 25,5x15cm Price: 8,70€ Delivery status: in stock the width of the root 8mm for M3 screw, to 16.000 rev / min | |
0167823-0,25 Název zboží: Velcro fastener width 5cm; length 25cm Price: 1,80€ Delivery status: in stock self-adhesive Velcro with high-quality acrylic glue, both parts. Price per 25cm. Notice: for fixing the battery | |
0123456789 Název zboží: digit sticker Price: 1,40€ Delivery status: in stock Suitable for describing servoconnectors. Digit height is 5mm. | |
0123456789BW Název zboží: Digits (stickers) for labeling the connectors (Black/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. | |
0123456789RW Název zboží: Digits (stickers) for labeling the connectors (Red/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. | |
020CGSTICK Název zboží: Center of gravity mark Price: 1,20€ Delivery status: in stock 6pcs. Ø14mm, 8Pcs. Ø10mm. | |
9001 Název zboží: Thermo-Shrinkable insulation Ø1,6mm (1m) Price: 0,85€ Delivery status: in stock For isolation of soldered joints of thin cables Ø1,6mm Price per 1 m. Notice: ~0,4m | |
KAV36.30090 Název zboží: Servo Cable Twisted Thin JR 0.14mm2 (PVC) Price: 0,80€ Delivery status: in stock Twisted three-core cable in JR colors (brown / red / orange) with PVC insulation, conductor cross-section 0.14 mm2. Highly flexible, strands of 72 mm 0.05 mm, max. 48 V, 3A. Diameter 1,0 / 1,9 mm. Made in Germany. Price for 1 meter Notice: ~1,7m | |
020M3250 Název zboží: Tool for easy insertion of the motor into the fuselage M3x250mm 2 pcs Price: 0,48€ Delivery status: in stock threaded rod M3 x 250mm, 2 pcs |
Spare parts
TOP1938-2 Název zboží: Q12 wing Price: 212,00€ Delivery status: contact us Each half of the wing is made as single part. The dihedral is built in during the molding process. | |
TOP3036 Název zboží: Fuselage pod Q12X w. firewall Price: 45,80€ Delivery status: in stock The fuselage is designed for the model q12x which is supplied in combination with a Carbon conic tube TA01, canopy and installed motor mount 32mm. | |
0101-TA01 Název zboží: Carbon conic tube Ø18/8; 800mm Q12; Q12x Price: 10,90€ Delivery status: in stock Tapered boom is made of carbon and fiberglass. Its dimensions are 18>8 (diameter), 800 mm length. The weight is ca 20 grams. | |
TOP2120-6 Název zboží: Canopy Q12X Price: 7,00€ Delivery status: in stock | |
TOP1938-3 Název zboží: Q12 elevator Delivery status: contact us | |
TOP1938-4 Název zboží: Q12 rudder Delivery status: contact us |