|
|
Very high torque/very high speed programmable digital low-profile brushless servo with steel gear and double BB-ed output shaft. Works great in 1:10 off-road RC cars. An all-aluminium case for perfect cooling under high load.
MB-2313 is programmable using the KAVAN GO servo USB programmer/interface and PC software.
Programmable Functions
- Servo Angle: Maximal servo rotation angle range setting. The default range is ca. 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).
- Servo Neutral: Servo neutral (centre) position setting.
- Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.
- PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.
- Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead bandwidth. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca. 2 µs) – Medium (ca. 3 µs) – Low (ca. 4 µs)
- Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on.
- Reverse: Reverses the servo movement direction.
- Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio.
- SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.
- Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:
- (a) Release: No fail-safe protection.
- (b) Keep Position: Keeps the position corresponding to the last correct control signal.
- (c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.
- Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).
- Default: Restores the factory default setting of the connected servo.
Wide input voltage range 4.8–7.4 V (nominal); operating voltage range 4.8–8.4 V.
25T/5.92mm output shaft.
Please meet - MIBO®
MIBO® is a brand born by the cooperation of KAVAN and Mibosport. It aims to provide top-quality equipment and electronics to all RC drivers - beginners, amateur racers and professionals. Under one roof. The proven quality and tradition of the KAVAN brand are spiced by the innovative knowledge and experience of the seasoned masters in the field from Mibosport. And it has a lot to offer.
Servo dimensions | Standard |
Servo type | Digital |
Programmable | Yes |
Thrust at 4.8V [kg/cm] | 14 |
Thrust at 6.0V [kg/cm] | 17 |
Thrust at 7.4V [kg/cm] | 19.5 |
Thrust at 8.4V [kg/cm] | 20 |
Speed at 4.8V [s/60st.] | 0.105 |
Speed at 6.0V [s/60st.] | 0.09 |
Speed at 7.4V [s/60st.] | 0.08 |
Speed at 8.4V [s/60st.] | 0.07 |
Servo gears | Metal |
Ball bearings | 2× |
High-voltage | Yes |
Power supply [V] | 4.8 - 8.4 |
Length [mm] | 40.8 |
Width [mm] | 20.2 |
Height [mm] | 26.5 |
Weight [g] | 57.2 |
Intended for | Off-road cars |
Cable length [mm] | 100 |
Equipments required
KAV20.3712 Název zboží: Servo arm Double 114mm (4,5") 25teeth M3 Price: 16,83€ Delivery status: in stock at supplier Aluminium double servo arm with offset for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between M3 holes: 114mm ; 102mm ; 89mm ; 76,5mm ; 63,5mm. | |
KAV20.3711 Název zboží: Servo arm Double 89mm (3,5") 25teeth M3 Price: 16,02€ Delivery status: contact us Aluminium double servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between M3 holes: 89mm ; 76,5mm ; 63,5mm. | |
MB-2411B Název zboží: MIBO Aluminum Adjustable 12-22mm Servo Horn 25T (Black) Price: 14,82€ Delivery status: in stock at supplier Super rigid 25T aluminum servo horn with 12–22 mm range adjustable length. | |
MB-2411P Název zboží: MIBO Aluminum Adjustable 12-22mm Servo Horn 25T (Purple) Price: 14,82€ Delivery status: in stock at supplier Super rigid 25T aluminum servo horn with 12-22 mm range adjustable length. | |
MB-2411R Název zboží: MIBO Aluminum Adjustable 12-22mm Servo Horn 25T (Red) Price: 14,82€ Delivery status: in stock at supplier Super rigid 25T aluminum servo horn with 12-22 mm range adjustable length. | |
KAV20.3706 Název zboží: Servo arm 51mm (2") 25teeth M3 Price: 13,21€ Delivery status: contact us Aluminium servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between servo shaft and M3 holes: 36mm ; 42,5mm ; 51mm. | |
KAV20.3710 Název zboží: Servo arm Double 64mm (2,5") 25teeth M3 Price: 13,21€ Delivery status: contact us Aluminium double servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between M3 holes: 64mm ; 50mm ; 38mm. | |
KAV20.3705 Název zboží: Servo arm 45mm (1,75") 25teeth M3 Price: 11,61€ Delivery status: contact us Aluminium servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between servo shaft and M3 holes: 45mm ; 38mm ; 32mm. | |
KAV20.3704 Název zboží: Servo arm 38mm (1,5") 25teeth M3 Price: 10,80€ Delivery status: in stock at supplier Aluminium servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between servo shaft and M3 holes: 38mm ; 32mm. | |
KAV20.3701 Název zboží: Servo arm 32mm (1,25") 25teeth M2 Price: 10,40€ Delivery status: in stock at supplier Aluminium servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between servo shaft and M3 holes: 32mm ; 25,5mm. | |
KAV20.3703 Název zboží: Servo arm 32mm (1,25") 25teeth M3 Price: 10,40€ Delivery status: in stock at supplier Aluminium servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between servo shaft and M3 holes: 32mm ; 25,5mm. | |
KAV20.3702 Název zboží: Servo arm 25mm (1") 25teeth M3 Price: 9,60€ Delivery status: in stock at supplier Aluminium servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between servo shaft and M3 hole: 25mm. | |
KAV20.3915 Název zboží: Carbon control horn 110 x 31mm Price: 5,98€ Delivery status: in stock at supplier Two-arm universal arc carbon lever for servos 110x31 mm, center hole 9 mm. For screwing onto standard plastic servo blades. | |
KAV20.3911 Název zboží: Carbon control horn 110 x 22mm Price: 3,98€ Delivery status: in stock at supplier Two-arm universal carbon lever for servos 110x22 mm, center hole 8 mm. For screwing onto standard plastic servo blades. | |
KAV20.3913 Název zboží: Páka serva uhlíková jednoramenná 66 x 22,5mm Price: 3,57€ Delivery status: in stock at supplier Jednoramenná univerzální uhlíková páka pro serva 66x22.5 mm, středový otvor 7 mm. Pro našroubování na standardní plastové kotouče serv. | |
KAV20.3914 Název zboží: Carbon control horn 40x21mm Price: 2,77€ Delivery status: in stock at supplier Single arm universal carbon servo lever 40x21 mm, center hole 9 mm. For screwing onto standard plastic servo blades. | |
KAV20.3916 Název zboží: Carbon control horn 53 x 20 Price: 2,77€ Delivery status: in stock at supplier Single arm universal arc carbon lever for servos 53x20 mm, center hole 9 mm. For screwing onto standard plastic servo blades. | |
KAV20.3912 Název zboží: Carbon control horn 60 x 22,5mm Price: 2,77€ Delivery status: in stock at supplier Two-arm universal carbon lever for servos 60x22.5 mm, center hole 7 mm. For screwing onto standard plastic servo blades. | |
KAV20.3700 Název zboží: Servoscrew M3x6 10pcs Price: 2,37€ Delivery status: in stock at supplier Screw for screwing into standard servo with metal gears to fix the lever. Hexagon socket head, black. The package is 10pcs. |
Spare parts
MB-2313-C Název zboží: MIBO Case Set for MB-2313 Servo Price: 36,91€ Delivery status: in stock at supplier | |
MB-2313-G Název zboží: MIBO Gear Set for MB-2313 Servo Price: 16,02€ Delivery status: in stock at supplier |
Equipments required for models
AE90044 Název zboží: RC10B74.2 CE Team Kit stavebnice (4WD) Price: 562,21€ Delivery status: in stock at supplier Nová Champions Edice RC10B74.2 4WD buggy s oddělenou kluznou spojkou a inovovaným nastavením. | |
SW910034D Název zboží: SWORKz S14-4D DIRT 1/10 4WD Off-Road Racing Buggy PRO stavebnice Price: 562,21€ Delivery status: in stock at supplier Stavebnice špičkového závodního podvozku buggy s pohonem 4WD. Model bez elektroniky a RC soupravy. | |
AE90036 Název zboží: RC10B74.2 Team Kit stavebnice (4WD) Price: 542,13€ Delivery status: in stock at supplier Stavebnice špičkového závodního podvozku buggy s pohonem 4WD. Model bez elektroniky a RC soupravy. | |
AE90045 Název zboží: RC10B74.2D CE Team Kit stavebnice (4WD) Price: 542,13€ Delivery status: in stock at supplier Nová Champions Edice RC10B74.2D 4WD buggy s inovovaným nastavením. | |
AE90037 Název zboží: RC10B74.2D Team Kit stavebnice (4WD) Price: 542,13€ Delivery status: contact us Stavebnice špičkového závodního podvozku buggy s pohonem 4WD. Model bez elektroniky a RC soupravy. | |
SW910034C Název zboží: SWORKz S14-4C 1/10 4WD Off-Road Racing Buggy PRO stavebnice Price: 542,13€ Delivery status: in stock at supplier Stavebnice špičkového závodního podvozku buggy s pohonem 4WD. Model bez elektroniky a RC soupravy. | |
AE70009 Název zboží: RC10 SC6.4 Team stavebnice, 2wd Short-Course Truck Price: 401,57€ Delivery status: contact us Dokonalý závodní stroj pro tratě s nejrůznějšími povrchy. Stavebnice bez elektroniky s pohonem 2WD. | |
AE90041 Název zboží: RC10B7 Team Kit stavebnice (2WD) Price: 401,57€ Delivery status: in stock at supplier Nástupce stavebnice závodní buggy B6.1, B6.2, B6.3 a B6.4 s pohonem zadní nápravy 2WD (motor před zadní nápravou). Model bez elektroniky a RC soupravy. Speciálně určeno pro astroturf, koberec a podobné povrchy s velkou přilnavostí. | |
AE70004 Název zboží: RC10 T6.4 Team stavebnice, 2wd Truck Price: 391,53€ Delivery status: in stock at supplier Dokonalý závodní stroj pro tratě s nejrůznějšími povrchy. Stavebnice bez elektroniky s pohonem 2WD. | |
AE90042 Název zboží: RC10B7D Team Kit stavebnice (2WD) Price: 391,53€ Delivery status: in stock at supplier Nástupce stavebnice závodní buggy B6.1D, B6.2D, B6.3D a B6.4D s pohonem zadní nápravy 2WD (motor před zadní nápravou). Model bez elektroniky a RC soupravy. Speciálně určeno pro hlínu, jíl a podobné povrchy s malou přilnavostí. | |
SW910033CE Název zboží: SWORKz S12-2C EVO “Carpet Edition” 1/10 2WD Off-Road Racing Buggy PRO stavebnice Price: 389,52€ Delivery status: in stock at supplier Stavebnice špičkového závodního podvozku buggy s pohonem 2WD. Model bez elektroniky a RC soupravy. | |
SW910033DE Název zboží: SWORKz S12-2D EVO “Dirt Edition” 1/10 2WD Off-Road Racing Buggy PRO stavebnice Price: 389,52€ Delivery status: in stock at supplier Stavebnice špičkového závodního podvozku buggy s pohonem 2WD. Model bez elektroniky a RC soupravy. | |
SW910033D Název zboží: SWORKz S12-2D “DIRT” 1/10 2WD Off-Road Racing Buggy PRO stavebnice Price: 309,20€ Delivery status: in stock at supplier Stavebnice špičkového závodního podvozku buggy s pohonem 2WD. Model bez elektroniky a RC soupravy. | |
NHA105 Název zboží: CARTEN T410 RALLY 1/10 4WD stavebnice Price: 192,73€ Delivery status: in stock at supplier Rally 1/10 podvozek bez veškeré elektroniky, karoserie. | |
NHA101 Název zboží: CARTEN T410 1/10 4wd Touring Car ARTR Price: 120,44€ Delivery status: in stock at supplier |